|
The Fence Barn provides two types of raw brush panels: Inline System and Offset System.
Both types are made from compressed brushwork held together with 8 pairs of running wires, stapled at approximately 75mm intervals.
Inline System
The Inline system uses wide brushwood panels, typically 2200mm wide x 1700 high x 58 mm thick.
Wires are left longer at the ends of the panels which can be fastened to the posts, leaving both sides of the fence identical.
The base, between the posts may be concrete, timber or any other material. Standing the panel up between the posts is a two person job.
Brush rolls can then be used to cover the post.
Offset System
The offset system uses1700mm high standard brushwood panels' provide finished fencing heights of up to 1800 to 1900mm, depending on the type of base and top used. Non-standard panel sizes can also be made to order.
The base which forms a continuous line seats the panel, is offset from the centre of the posts and rails. A base rail and top rail are required.
The brush panels when joined appear to be continuous, whilst on the other side the posts and rails are left exposed.
Other sizes are available on request. Please view our Gallery or Contact us for more information.
|
